Information

Good news for Instagram users. The videos in your feed are about to become a lot more awesome than before.

The new fabulous video sharing app owned by the Facebook this Tuesday, Facebook introduced a whole new standalone app known as "Hyperlapse", which allows you to easily create time-lapse videos from a mobile device, thats pretty cool.

Time-lapse is really a technique where online video media is captured at the lower frame pace than normal, and you can played it back at the standard frame pace. The result is actually in that motion usually takes a long time, like a rose bloomiing, takes only seconds.


Usually, time lapse videos are creates on holding your cellular or camera still, You couldnt move a bit when you usually record any video, " according to a post from Instagram blog.

"Hyperlapse from Instagram featuring built-in stabilization technology that lets you create moving, handheld time lapses that result in a cinematic and pretty fab look, quality and calm — a feat which has been previously only possible with quite-expensive cameras or other equipment.

We must have to say Thanks to the latest image-stabilization engineering, shaky footage is going to be smoothed out for any more cinematic look..


One more important thing, You dont need any account to create a "Hyperlapse videos". All you guys need to do is, Just open the camera, and simply tap the screen once to start with recording then tap again to stop.

After recording the video, you can go with a playback speed from 1 x "normal speed" till 12 x "Faster speed, then just simply tap the Green check mark to save your data to the "Camera Roll". With the use of Camera roll, You guys can simply share your videos with Instagram friends or followers, on facebook as well.


At this time, the Hyperlapse app is just available for iOS devices. Go to the App-Store to install it to your cellular without any cost. This app is totally Free for iOS users.

So, Here we mention the step by set guide to the firmware manually in the case of automatic update didnt work.
Step 1. Just flash the firmware manually for the "Samsung Galaxy" Tab 4 7.0 T230 Wi-Fi only.

2. Make a manual backup from all data files as well as personal settings stored in the Galaxy tablet.

3.      The particular battery level has to be at least 50 percent to avoid electric power interruption during the set up.

4.      Now Enable USB debugging mode on the tablet that you can get under the Settings menu.

5.      Download the important USB drivers for Galaxy Tab 4 7. 0 T230 Wi-Fi model on the computer. If your Samsung Kies is

already installed on the machine, connect it using any USB cable for installing  the drivers.

6.      Now you must download the "ODIN flash tool version 3.09" as well as the official Android 4.4.2 XXU0ANG1 KitKat firmware on your personal computer or laptop.

Notice: We are not in charge of any errors that might occur on the device. Read and must follow to the instructions to any avoid issue. Do this at the own risk!!


1.      Now Switch off the Samsung Galaxy Tab 4 7. 0 T230 Wi-Fi.

2.      Restart into Download mode by pressing as well as holding volume upwards and power keys simultaneously till the

Smartphone logo appears.

3.      Now just Extract the ODIN flash tool files and also the official Android 4.4.2 KitKat firmware for an easy access location on

your  p.computer or laptop.

4.      Start the ODIN flash tool on the pc.

5.      Hook up the Samsung Galaxy Tablet 4 7. 0 on your computer using a USB cable.

6.     IDENTITY: COM should turn yellow if device is actually detected by this computer. Otherwise, install the necessary USB drivers as mentionened above.

For the ODIN flash application, select the following files to the installation:

• Click "PDA" then select the file with (CODE) in its name.
• Click "PHONE" then select the file with (MODEM) in its name. If not found, ignore this step.
• Click CSC then select the file with CSC in its name. If you couldnt found. So, dont bother just ignore this step.
• Hit on "PIT" then select the ".pit" file. If not found, ignore this step too.

8.      Check on the (AUTO REBOOT) and "F.RESET TIME" on the ODIN flash tool.

9.      DO NOT check the RE-PARTITION option within the ODIN flash tool when there is NO ". pit" data file used.

10.  Now Click on the start button to start installation for the ODIN tool.

11.  After you done the installation, the tablet may restart automatically which could take up five minutes before reaching properly

to the home screen section.

12.  In the case tablet reaches the home screen, Now you can unplugged it throughout the USB connection.